Devicelator Unit

The BP Devicelator unit can easily be installed to protect any battery such as: Lithium Ion batteries, lead acid batteries or any other type of batteries to ensure that the battery will not drain.

The BPB uses unique micro-electronic technology and patented software to continually monitor the battery power, health and temperature. When the BPB Devicelator detects the power level drops below a predefined safe level, it automatically isolates the specific power consuming device from the electrical system.

This will ensure that the device will not drain the battery thus saving power to start the engine and the battery operates in a "safe zone" which prolongs the battery life. When to battery power go back to safe level (after starting the engine for example) the Devicelator will automatically reconnect the specific device. Devicelator unit provide the ability to disconnect the battery willingly (This option is useful when living the vehicle unused for long periods of time).

The BPB Devicelator unit is used for both vehicles and boats and can be incorporated for storage of energy from wind and solar plants.  It works on 6V, 12V and 24V batteries with up to 40AH.

• Automatic disconnection (Programmable voltage threshold*, the default Disconnect Voltage Threshold is 11.8V).
• Manual reconnection.
• Wire attached push button (supplied) reconnection.
  * should define the disconnect threshold for non-default setting when ordering
•  Wire attached push button (supplied) disconnection

DIMENSIONS
H = 7/8”
W = 2 1/2”
L = 1 1/2”
WEIGHT
The unit weight: 0.33lb 
Accessories: xlb (xg)
Packaging: xg, (xlb)
Total weight: xg (xlb)

 

ELECTRICAL CURRENT SPECIFICATIONS

Operational Current Consumption for type I after disconnect: 10 MicroAmps
Maximum Peak Amperage: 1000 Amps, for 15 consecutive seconds.
Continuous Amperage Capacity: 250 Amps.
Disconnect Voltage Threshold: 11.8V

OPERATIONAL TEMPERATURE RANGE
-40°F (-40°C) to 257°F (125°C).

When working with lead acid batteries and accessories, caution must be employed:
- Shield eyes. Do not open vent caps or puncture battery casing in any way.
- Sulfuric acid can cause blindness and severe burns.
- Rinse hands and flush eyes with water immediately.
- Avoid sparks, flames and smoking

MATERIAL AP 66: None combustible, none flammable.

WATER PROOF: IP 66

Maximum current draw for 15 consecutive seconds: 500 Amps,

Continuous current draw: 80 Amps.